ETM DM

MTA’s modular air treatment modules for large capacity systems.
Nominal air flow 30 – 540 m³/min.

The ETM DM are compressed air treatment modular units that can be connected to each other via MASTER/SLAVE logic. Each unit integrates a high-efficiency compact aluminium exchanger, a separation system and a condensate drain. In the MASTER configuration, the ETM DM modules include an electronic control unit that ensures correct operation.

Installable anywhere

The upgrading of large systems for the production of compressed air is often problematic and very expensive due to the lack of available space in equipment rooms. ETM DM modules perfectly solve this problem because, thanks to their compact dimensions and the possibility of being connected to a chiller located outside of the compressor room, they can also be easily integrated within existing systems.

Maximum reliability level

Very often large systems are not designed according to redundancy criteria as the installation of multiple dryers in stand-by with the corresponding piping take up valuable space. During maintenance these systems must therefore be put offline causing costly system downtime. The modular approach of the ETM DM ensures intrinsic redundancy of the critical components and therefore enables the reduction of periods of system downtime.

Ultimate energy saving

The load profiles of most of the manufacturing industries are highly variable. The flow rates of compressed air to be processed and the process temperatures fluctuate greatly during the day, forcing the dryers to operate at partial load for most of the time. The system, consisting of one or several ETM DM modules connected to a TAEevo chiller thus equates to a thermal mass energy saving dryer as it is capable to adapt its energy consumption to the actual requirement for inlet compressed air, ensuring the highest level of energy saving.


Add To Quote Cart
This item has been added to your cart.

PDF Downloads

Contact us for further technical assistance.

MTA - ETM DM

Technical specifications:

  • Extremely robust 2-in-1 heat exchanger, comprising an air-air heat exchanger, an air-glycol water exchanger – optimised for an exchange in countercurrent and an high efficiency demister separator;
  • Microprocessor control and management of energy savings standard on MASTER modules;
  • Dynamic dew-point DDF energy saving function with ambient temperature “tracking logic” (ambient sensor DDF kit necessary);
  • Liquid chiller remote ON/OFF control;
  • Safety system for protection against freezing of the condensate;
  • Flanged manifold kit (connection of 2/3 MASTER/SLAVE modules);
  • Hydraulic connection kit (max distance 5/10 m);
  • Kit RS485 Modbus.

Related Products

Specifically designed for the needs of the high pressure dryer user, offering working pressures of up to 50 barg. Nominal air flow 0,7 - 119 m³/min

Thermal mass cycling refrigerated air dryers. Air flow 38 – 237 m³/min

MTA Energy-saving non-cycling thermal mass refrigerated air dryers for Compressed Air Flow 0.4 – 37.7 m³/min

Specifically designed for the desiccation of the Biogas destined towards the co-generator. Biogas flow 0,8 - 78,3 m³/min.